G517C1T11U datasheet pdf Power Distribution Switch price

The G517C1T11U is an integrated power switch for self-powered and bus-powered Universal Serial Bus (USB) applications.

Several Protection features include current limiting and thermal shutdown to prevent catastrophic switch failure caused by increasing power dissipation when continuous heavy loads or short circuit occurs. A built-in
charge pump is used to drive the N-channel MOSFET that is free of parasitic body diode to eliminate any
reversed current flow across the switch when it is powered off. The output reverse-current protection turns
off the MOSFET switch whenever the unexpected continuously reverse current occurs.

FLAG is an open-drain output report over-current or over-temperature event and has typical 9ms deglitch
timeout period.

Features
40mΩ/70mΩ High-Side MOSFET
Available with Current Limits with Foldback
Operating Range:2.7V to 5.5V
1mS Typical Rise Time
Fast Overcurrent Response -1.5μs (TYPICAL)
Under voltage Lockout
Logic Level Enable Pin, Available with
Active-High or Active-Low Version
No Reverse Current when Power Off
Deglitched Open-Drain Over-Current Flag Output (FLAG)
Output Reverse Current Protection
SOT-23-5, TSOT-23-6, TDFN2x2-6, WDFN2x2-6,
TSOT-23-6 FC, TSOT-23-5 FC, and MSOP-8
Packages (Halogen Free/Pb Free)
UL Certification_#E232223
CB Test Certification by IEC 60950-1:2005/ EN
60950-1:2006

Applications
High-Side Power Protection Switch
USB Power Management
USB Host and Self-Powered Bubs
USB Bus-Powered Hubs
Hot Plug-In Power Supplies
Battery-Charger Circuits

ORDER NUMBER: G517C1T11U
MARKING: 5AC1x
ENABLE: Active High
Current Limit: 0.8A
Output MOS RDS(ON):75mΩ
Discharge Resistor: Yes
TEMP. RANGE: -40 C to +85 C
PACKAGE (Green): SOT-23-5

We are the GMT agent, providing G517C1T11U datasheet, technical support, batch support, and alternative model solutions. Welcome to consult.