G697L263T1UF In Stock GMT Microprocessor Reset IC Authorized GMT Electronic Components Wholesalers

Features:
– Precision Monitoring of +3V, +3.3V, and +5V Power-Supply Voltages
– Fully Specified Over Temperature
– Available in Three Output Configurations: Push-Pull RESET Output (G696L), Push-Pull RESET Output (G696H), Open-Drain RESET Output (G697L)
– Externally Programmable Time Delay Generator
– 14µA Supply Current
– Guaranteed Reset Valid to VCC = 0.8V
– Power Supply Transient Immunity
– 5 pin SOT-23-5 or TSOT-23-5 Packages
– 2% Threshold Accuracy

General Description:
The G696/G697 series are microprocessor supervisory circuits used to monitor power supplies in microprocessor and digital systems. They provide excellent circuit reliability and low cost adjustments when used with +5V, +3.3V, +3.0V-powered circuits. These circuits assert a reset signal whenever the VCC supply voltage declines below a preset threshold, with hysteresis keeping it asserted for a time delay determined by an externally programmable time delay generator after VCC has risen above the reset threshold. The G697L has an open-drain output stage, while the G696 series have push-pull outputs. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCC down to 0.8V. The low supply current makes the G696/G697 ideal for use in portable equipment.

Applications:
– Computers
– Controllers
– Intelligent Instruments
– Critical µP and µC Power Monitoring
– Portable / Battery-Powered Equipment
– Automotive

**Pin Configuration and Typical Application Circuit:**
The G697L263T1UF features a 5-pin SOT-23-5 or TSOT-23-5 package and is designed for open-drain RESET output, requiring a pull-up resistor connected to a voltage higher than VCC. The device is part of the G696/G697 series, which includes different threshold voltage options for various applications.

Ordering Information:
The G697L263T1UF is ordered with the part number indicating the temperature range and package type, specifically designed for operation between -40°C and +105°C in a SOT-23-5 package.

This product is designed to provide reliable power supply monitoring and reset functionality in a variety of electronic systems, ensuring stable operation even under fluctuating power conditions.