RS70B16G4S15G eMMC 16GB Rayson Electronic Component Dealers

Product Overview:

• Model: RS70B16G4S15G
• Capacity: 16GB
• Controller: AT (Advanced Technology)
• Package Type: FBGA153
• Voltage: VCC 2.7 – 3.6V; VCCQ 1.7 – 1.95V or 2.7 – 3.6V
• Temperature Range: Operating: -25°C to 85°C, Storage: -40°C to 85°C

Features:

• JEDEC eMMC5.1 Specification Compatibility: Backward compatible with eMMC 4.41/4.51/5.0.
• Bus Mode: Supports data bus width of 1 bit (default), 4 bits, and 8 bits with a data transfer rate of up to 400MB/s (HS400) and a clock frequency of 0 to 200MHz.
• Operating Voltage Range: VCC 2.7 – 3.6V and VCCQ 1.7 – 1.95V or 2.7 – 3.6V.
• Hardware ECC Engine: Supports hardware ECC for improved error correction, enhancing device lifetime and ability to handle higher raw bit error rates.
• Auto Power Saving Mode: Designed to prevent sudden power-off scenarios.
• JEDEC Standard Features: Supports features defined in the JEDEC standard, including RPMB, boot partition, write protection, erase, discard, trim, sanitize, HPI, background operations, device health report, field firmware update (FFU), sleep/awake, and packed command.

Functional Description: The RS70B16G4S15G consists of an eMMC controller and NAND flash memory. The controller interfaces with the host system, allowing data to be written to and read from the NAND flash memory, and handles flash management, including logical to physical translation, bad block management, wear leveling, and performance optimization. The interface is a 12-bit line, supporting flexible 1-bit/4-bit/8-bit data bus, making it easy for the eMMC host to integrate the eMMC device and access it like an MMC card without worrying about NAND flash management.

Pin and Package: The RS70B16G4S15G features a TFBGA-153(11.5×13) package with various signal types including data I/O (DAT0-DAT7), command I/O (CMD), clock (CLK), reset (RST_n), data strobe (DS), and power/ground connections for VCC, VCCQ, VSS, and VSSQ.